LDAP Reconfigure Troubleshooting on Faraday 3.16
As part of the constant grow there were introduced new security rules on LDAP and as a consequence when upgrading Faraday to 3.16 it LDAP needs to be reconfigured.
Steps to do it:
- faraday-manage settings -a update ldap
Then update every field according to the configuration on-prem.
$ faraday-manage settings -a update ldap
Update settings for: ldap
Do you confirm your changes on ldap?
[This feature is only available for Corporate version users] For the time being Faraday doesn't support a hybrid installation using both LDAP and local users. Enabling LDAP disables local users and vice versa. However, local users are not deleted, ...
This guide is intended to provide solutions for common problems. If your problem is not listed below, make sure to contact us! Before moving on, verify that you are using the latest available version running faraday-manage status-check for the Server ...
LDAP with OKTA
Only available from Faraday v3.10 onwards First of all, navigate to: https://www.okta.com/ Click on Try Okta and Sign Up: Remember your user and workdomain from email@example.com Okta will send you an e-mail with the URL and your temporary ...
Faraday's installers (.deb or .rpm) will install Faraday Server as a service. Faraday Server is the interface between PostgreSQL, Faraday Client and the WebUI. The Server's responsibility is to transmit information between the Client or WebUI and ...
Faraday will be installed as a service if you use .deb or .rpm. Note: if you're updating from Faraday v3.8.1 or lower, follow the instructions specified in the last section of this article. Once you're done, you can proceed with the instructions ...